You are here:
Siemens 6ES7534-7QE00-0AB0 SIMATIC S7-1500 Analog Input/Output Module
The Siemens 6ES7534-7QE00-0AB0 is a SIMATIC S7-1500 analog input/output module that combines 4 configurable analog inputs and 2 analog outputs in one module. Its inputs support voltage, current, resistance, RTD, and thermocouple measurements with 16-bit resolution, while the two outputs support voltage and current signals with 0.3% operating accuracy. The module also provides hardware interrupts, diagnostics, configuration and calibration in RUN, and Siemens identifies it as an active PM300 product.
Looking for a Quote? Contact Us Now
Categories: PLC I/O Modules
Description
The Siemens SIMATIC S7-1500 AI 4xU/I/R/RTD/TC / AQ 2xU/I ST module combines versatile analog signal acquisition and output in a single 25 mm-wide unit. Its four analog inputs support 1–5 V, ±1 V, ±10 V, ±2.5 V, ±250 mV, ±5 V, ±50 mV, ±500 mV, ±80 mV, 0–20 mA, ±20 mA, and 4–20 mA, together with a broad range of RTD, thermocouple, resistance, and PTC measurements. The module supports thermocouple types B, E, J, K, N, R, S, and T, plus several Pt and Ni RTD types.
The two analog outputs support 0–10 V, 1–5 V, −10 to +10 V, 0–20 mA, −20 to +20 mA, and 4–20 mA, with 16-bit maximum resolution including sign. The module supports internal and external temperature compensation, parameterizable integration and smoothing, hardware interrupts, channel-specific diagnostics, substitute values, and MSI/MSO functions. It also provides electrical isolation from the backplane bus and load voltage and is supplied with a 40-pole push-in front connector, infeed element, shielding bracket, and shield terminal.
QTech Safety is a leading supplier of Siemens 6ES7534-7QE00-0AB0 SIMATIC S7-1500 Analog Input/Output Module in Ireland, offering competitive prices and fast worldwide shipping across United Kingdom (UK), Germany, France, Italy, Spain, United States USA, Canada, Mexico, and Western Australia (Perth). Buy Siemens PLC I/O Modules from one of Ireland’s most trusted industrial safety equipment suppliers.
Features of Siemens 6ES7534-7QE00-0AB0 SIMATIC S7-1500 Analog Input/Output Module
- Combined SIMATIC S7-1500 analog input/output module for flexible automation applications.
- Provides 4 analog input channels and 2 analog output channels.
- Inputs support voltage, current, resistance, RTD, and thermocouple measurements.
- Supports a wide selection of voltage and current input ranges.
- Supports Pt100, Pt200, Pt500, Pt1000, Ni100, Ni1000, and LG-Ni1000 temperature sensors.
- Supports thermocouple types B, E, J, K, N, R, S, and T.
- Provides resistance measurement from 0–150 Ω, 0–300 Ω, 0–600 Ω, and 0–6000 Ω, plus PTC.
- Provides up to 16-bit input and output resolution including sign.
- Supports internal and external thermocouple temperature compensation.
- Supports 2-wire, 3-wire, and 4-wire connections for applicable resistance and sensor measurements.
- Analog outputs support both voltage and current signals.
- Supports hardware interrupts and comprehensive channel diagnostics.
- Supports substitute values for analog outputs.
- Provides MSI and MSO functionality.
- Supports reparameterization and calibration in RUN.
- Provides I&M0 to I&M3 identification data and firmware update capability.
- Supports PROFINET and PROFIBUS engineering integration.
- Delivered with a 40-pole push-in front connector, infeed element, shield bracket, and shield terminal.
Technical Specifications of Siemens 6ES7534-7QE00-0AB0
- Product type: AI 4xU/I/RTD/TC / AQ 2xU/I ST
- Product family: SM 534 analog input/output modules
- HW functional status: From FS01
- Firmware version: V1.0.0
- Firmware update: Yes
- I&M data: I&M0 to I&M3
- Engineering software: TIA Portal V13 / V13.0.2
- STEP 7: V5.5 SP3
- PROFIBUS: GSD V1.0 / Revision V5.1
- PROFINET: GSD V2.3
- Isochronous mode: No
- MSI: Yes
- MSO: Yes
- Configuration in RUN: Yes
- Calibration in RUN: Yes
- Supply voltage: 24 V DC
- Supply voltage range: 19.2–28.8 V DC
- Reverse polarity protection: Yes
- Current consumption: 200 mA max.
- Power consumption from backplane bus: 0.7 W
- Power loss: 3.3 W typical
- Number of analog inputs: 4
- Number of analog outputs: 2
- Input types: Voltage, current, resistance, RTD, thermocouple
- Voltage input ranges: 1–5 V, ±1 V, ±10 V, ±2.5 V, ±250 mV, ±5 V, ±50 mV, ±500 mV, ±80 mV
- Current input ranges: 0–20 mA, 4–20 mA, ±20 mA
- RTD support: Pt and Ni sensor types
- Thermocouple types: B, E, J, K, N, R, S, T
- Resistance ranges: 0–150 Ω, 0–300 Ω, 0–600 Ω, 0–6000 Ω
- PTC measurement: Yes
- Temperature compensation: Internal / external / fixed reference
- Input resolution: Up to 16 bit including sign
- Output voltage ranges: 0–10 V, 1–5 V, −10 to +10 V
- Output current ranges: 0–20 mA, 4–20 mA, −20 to +20 mA
- Output resolution: Up to 16 bit including sign
- Hardware interrupts: Yes
- Diagnostic functions: Yes
- Limit-value alarms: Yes
- Wire-break detection: Yes
- Short-circuit detection: Yes, for voltage outputs
- Substitute values: Yes, analog outputs
- Isolation: From backplane bus and load voltage
- Dimensions (W × H × D): 25 × 147 × 129 mm
Applications
The Siemens 6ES7534-7QE00-0AB0 SIMATIC S7-1500 Analog Input/Output Module is commonly used in:
- Mixed analog signal monitoring and control in S7-1500 systems
- Temperature measurement using RTD and thermocouple sensors
- Process instrumentation using voltage and current signals
- Resistance and PTC measurement applications
- Analog valve and actuator control
- Machine and process automation requiring combined analog I/O
Why Choose QTech Safety?
At QTech Safety, we’re more than just a safety supplier we’re your trusted partner in workplace protection and compliance.
Here’s why companies across UK and Ireland (EU) choose us for safety products and training:
- Comprehensive Range of Safety Equipment:
From gas detection and PPE to industrial safety tools, we offer one of the widest selections of trusted brands all at competitive Irish market prices. - Test & Measurement Instruments You Can Trust:
We supply a wide range of test and measurement instruments from the most leading and trusted brands, including industrial sensors, multimeters, oscilloscopes, accelerometers, proximity sensors, and other advanced measurement tools to support accurate diagnostics, condition monitoring, calibration, and maintenance applications. - Expert Health & Safety Training:
We provide professional health and safety training programmes designed to help your workforce stay compliant and confident on the job. - Fast, Reliable Delivery Worldwide:
Whether you’re in Texas United States or Perth Western Australia, our fast delivery service ensures you get your safety equipment quickly and efficiently. - Trusted by European Businesses:
We’re proud to support industries across Europe (UK) with certified safety solutions, expert advice, and responsive customer service.
We Ship Worldwide
At QTech Safety, we supply industrial sensors and instrumentation across Ireland, offering fast and reliable worldwide delivery. Through strong global logistics partnerships, we ensure efficient shipping and professional support for customers in Europe, North America, and Australia.
🡆 Europe (United Kingdom, Ireland, Germany, France, Italy, Spain, and the rest of European Union)
🡆 Australia (Western Australia WA, Queensland QLD, and New South Wales NSW)
🡆 North America (United States, Canada, Mexico)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
