You are here:
Siemens 6ES7132-6BF01-0BA0 SIMATIC ET 200SP Digital Output Module
The Siemens 6ES7132-6BF01-0BA0 is a SIMATIC ET 200SP digital output module, providing 8 source-type (PNP) digital outputs at 24V DC, 0.5 A each, for the ET 200SP distributed I/O system. This is the “Standard” version, offering more advanced diagnostics than the entry-level “Basic” module, including short-circuit detection to both L+ and ground, plus wire-break monitoring. It’s a compact, 15mm-wide module that snaps onto a BU type A0 base unit within an ET 200SP station.
Looking for a Quote? Contact Us Now
Categories: PLC I/O Modules
Description
The Siemens SIMATIC ET 200SP digital output module 6ES7132-6BF01-0BA0 provides 8 digital outputs rated at 24V DC and 0.5 A per channel, using source-type (PNP) switching. Each output has electronic short-circuit protection with a typical response threshold of 1 A, and two outputs can be paralleled for redundant control of the same load, improving reliability in critical applications. The module supports switching frequencies up to 100 Hz on resistive loads, making it suitable for both fast-switching and standard on/off control tasks.
This module offers a more complete diagnostic set than the Basic version, including monitoring for wire-break, short-circuit to ground, short-circuit to L+, and supply voltage, all reported through a group error and shown on status LEDs. It’s rated for use in safety-related shutdown of standard modules, achieving Performance Level d (ISO 13849-1) and SIL 2 (IEC 61508) in that configuration. It’s engineered with STEP 7 TIA Portal (from V14) or classic STEP 7 (from V5.5 SP3), and supports both PROFIBUS and PROFINET GSD configuration files.
QTech Safety is a leading supplier of Siemens 6ES7132-6BF01-0BA0 SIMATIC ET 200SP Digital Output Module in Ireland, offering competitive prices and fast worldwide shipping across United Kingdom (UK), Germany, France, Italy, Spain, United States USA, Canada, Mexico, and Western Australia (Perth). Buy Siemens PLC I/O Modules from one of Ireland’s most trusted industrial safety equipment suppliers.
Features of Siemens 6ES7132-6BF01-0BA0 SIMATIC ET 200SP Digital Output Module
- Compact 15mm-wide digital output module for SIMATIC ET 200SP
- 8 digital outputs rated at 24V DC, 0.5 A each, PNP (source) type
- Advanced diagnostics: wire-break, short-circuit to L+, short-circuit to ground
- Electronic short-circuit protection on each channel
- Redundant load control by paralleling two outputs
- Substitute value output on communication loss
- Switching frequency up to 100 Hz on resistive loads
- Suitable for safety-related shutdown of standard modules (PL d, SIL 2)
- Onboard LEDs for power, channel status, and module diagnostics
- Reverse polarity protection on supply voltage
- Fits BU type A0 base units with automatic mechanical coding
- Configurable in STEP 7 TIA Portal (V14+) or classic STEP 7 (V5.5 SP3+)
Technical Specifications of Siemens 6ES7132-6BF01-0BA0
- Product type: DQ 8x24VDC/0.5A ST
- HW functional status: From FS02
- Firmware version: V0.0
- Usable BaseUnits: BU type A0
- Color code: CC02
- Engineering software: TIA Portal V14+, STEP 7 V5.5 SP3+, PCS 7 V8.1 SP1+
- Supply voltage: 24V DC (range 19.2V to 28.8V)
- Reverse polarity protection: Yes
- Current consumption: 35 mA max (no load)
- Output voltage: 24V DC rated
- Power loss: 1 W typical
- Address space: 1 byte + 1 byte QI information
- Number of digital outputs: 8, parameterizable
- Output type: Source (PNP), current-sourcing
- Short-circuit protection: Yes, per channel, typical response 1 A
- Inductive shutdown voltage limitation: Typical L+ (-50V)
- Rated output current (signal “1”): 0.5 A
- Residual current (signal “0”): 0.1 mA max
- Output delay, resistive load (“0” to “1”): 50 µs max
- Output delay, resistive load (“1” to “0”): 100 µs max
- Load resistance range: 48 Ω to 12 kΩ
- Switching frequency, resistive load: 100 Hz max
- Switching frequency, inductive load: 2 Hz max
- Switching frequency, lamp load: 10 Hz max
- Max current per channel: 0.5 A
- Max current per module: 4 A
- Max cable length: 1,000 m shielded, 600 m unshielded
- Diagnostic functions: Yes — supply voltage, wire-break, short-circuit to L+/ground, group error
- Diagnostic alarm: Yes
- Status LEDs: Green PWR LED, green channel status LED, green/red module DIAG LED
- Isolation between channels: No
- Isolation between channels and backplane bus: Yes
- Isolation test voltage: 707V DC (type test)
- Suitable for safety functions: No (standalone); suitable for safety-related shutdown of standard modules
- Safety class (with shutdown): PL d (ISO 13849-1), SIL 2 (IEC 61508)
- Operating temperature: -30°C to 60°C (horizontal), -30°C to 50°C (vertical)
- Max installation altitude: 5,000 m (restrictions above 2,000 m)
- Dimensions (W x H x D): 15 x 73 x 58 mm
- Weight: 30 g approx.
Applications
The Siemens 6ES7132-6BF01-0BA0 SIMATIC ET 200SP Digital Output Module is commonly used in:
- Standard digital output control requiring advanced diagnostics
- Solenoid, relay coil, and indicator lamp switching
- Machine and process actuator control
- Applications requiring redundant output control for reliability
- Safety-related shutdown of standard output modules
- Systems needing wire-break and short-circuit fault detection
Why Choose QTech Safety?
At QTech Safety, we’re more than just a safety supplier we’re your trusted partner in workplace protection and compliance.
Here’s why companies across UK and Ireland (EU) choose us for safety products and training:
- Comprehensive Range of Safety Equipment:
From gas detection and PPE to industrial safety tools, we offer one of the widest selections of trusted brands all at competitive Irish market prices. - Test & Measurement Instruments You Can Trust:
We supply a wide range of test and measurement instruments from the most leading and trusted brands, including industrial sensors, multimeters, oscilloscopes, accelerometers, proximity sensors, and other advanced measurement tools to support accurate diagnostics, condition monitoring, calibration, and maintenance applications. - Expert Health & Safety Training:
We provide professional health and safety training programmes designed to help your workforce stay compliant and confident on the job. - Fast, Reliable Delivery Worldwide:
Whether you’re in Texas United States or Perth Western Australia, our fast delivery service ensures you get your safety equipment quickly and efficiently. - Trusted by European Businesses:
We’re proud to support industries across Europe (UK) with certified safety solutions, expert advice, and responsive customer service.
We Ship Worldwide
At QTech Safety, we supply industrial sensors and instrumentation across Ireland, offering fast and reliable worldwide delivery. Through strong global logistics partnerships, we ensure efficient shipping and professional support for customers in Europe, North America, and Australia.
🡆 Europe (United Kingdom, Ireland, Germany, France, Italy, Spain, and the rest of European Union)
🡆 Australia (Western Australia WA, Queensland QLD, and New South Wales NSW)
🡆 North America (United States, Canada, Mexico)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
