You are here:
Siemens 6ES7134-6GB00-0BA1 SIMATIC ET 200SP Analog Electronics Module
The Siemens 6ES7134-6GB00-0BA1 is a SIMATIC ET 200SP analog electronics module, providing 2 current inputs with support for both 2-wire and 4-wire transmitter connections. It’s a compact, 15mm-wide module built to snap onto a BU type A0 or A1 base unit within an ET 200SP station. With 16-bit resolution and a built-in 24V encoder supply for connected sensors, it’s well suited for precise current measurement in process automation. It’s a current production item, actively engineered with the latest STEP 7 TIA Portal and PROFINET/PROFIBUS configuration files.
Looking for a Quote? Contact Us Now
Categories: PLC I/O Modules
Description
The Siemens 6ES7134-6GB00-0BA1 SIMATIC ET 200SP AI 2xI 2-/4-wire Standard analog electronics module supports three current input ranges — 0 to 20mA, -20mA to +20mA, and 4 to 20mA — with resolution up to 16 bits including sign. It uses a Sigma Delta measurement principle and offers a parameterizable integration time with interference suppression settings for 16.6Hz, 50Hz, or 60Hz, giving flexibility to match local power line frequency conditions. The module includes a built-in 24V encoder supply, delivering up to 50 mA total for 2-wire sensor connections, or up to 200 mA for 4-wire sensor connections, with short-circuit protection on both.
This module includes a complete diagnostic set, covering supply voltage monitoring, wire-break detection (on the 4-20mA range), short-circuit detection on the encoder supply, group error, and overflow/underflow, all shown through onboard LEDs. It supports reparameterization while the system is running (CiR), allowing configuration changes without stopping the process. Electrical isolation is provided between the channels and both the backplane bus and the electronics power supply.
QTech Safety is a leading supplier of Siemens 6ES7134-6GB00-0BA1 SIMATIC ET 200SP Analog Electronics Module in Ireland, offering competitive prices and fast worldwide shipping across United Kingdom (UK), Germany, France, Italy, Spain, United States USA, Canada, Mexico, and Western Australia (Perth). Buy Siemens PLC I/O Modules from one of Ireland’s most trusted industrial safety equipment suppliers.
Features of Siemens 6ES7134-6GB00-0BA1 SIMATIC ET 200SP Analog Electronics Module
- Compact 15mm-wide analog electronics module for SIMATIC ET 200SP
- 2 current inputs, supporting 0-20mA, ±20mA, and 4-20mA ranges
- Supports both 2-wire and 4-wire transmitter connections
- 16-bit resolution (including sign) on the bipolar range
- Built-in 24V encoder supply, up to 200 mA (4-wire) with short-circuit protection
- Parameterizable interference suppression: 16.6Hz, 50Hz, or 60Hz
- Four-stage parameterizable digital filtering for signal smoothing
- Wire-break, short-circuit, supply voltage, and group error diagnostics
- Reparameterization possible during RUN (CiR)
- Onboard LEDs for power, channel status, and module diagnostics
- Electrical isolation between channels, backplane bus, and electronics supply
- Fits BU type A0/A1 base units with automatic mechanical coding
Technical Specifications of Siemens 6ES7134-6GB00-0BA1
- Product type: AI 2xI 2-/4-wire ST
- HW functional status: From FS04
- Usable BaseUnits: BU type A0, A1
- Color code: CC05
- Engineering software: TIA Portal V13 SP1+, STEP 7 V5.5 SP3+
- Supply voltage: 24V DC (range 19.2V to 28.8V)
- Reverse polarity protection: Yes
- Current consumption: 45 mA max (without sensor supply)
- 24V encoder supply (2-wire): 50 mA max total, short-circuit protected
- 24V encoder supply (4-wire): 200 mA max, short-circuit protected (module-wise)
- Power loss: 1.1 W typical
- Address space: 4 bytes + 1 byte QI information
- Number of analog inputs: 2, for current measurement
- Permissible input current (destruction limit): 50 mA max
- Cycle time (all channels): 500 µs min
- Input range 0 to 20mA: 15 bit, input resistance 130 Ω (90 Ω with two wires)
- Input range -20mA to +20mA: 16 bit incl. sign, input resistance 130 Ω
- Input range 4 to 20mA: 15 bit, input resistance 130 Ω (90 Ω with two wires)
- Max cable length: 1,000 m shielded
- Measurement principle: Sigma Delta
- Resolution: Up to 16 bit (including sign)
- Interference suppression frequency: 16.6 / 50 / 60 Hz / off
- Conversion time per channel: 50 ms @ 60Hz, 60 ms @ 50Hz, 180 ms @ 16.6Hz, 500 µs (no filter)
- Smoothing (parameterizable): None (1x), low (4x), medium (8x), high (16x conversion time)
- 2-wire transmitter burden: 650 Ω max
- Linearity error: ±0.01% (relative to input range)
- Temperature error: ±0.005%/K
- Crosstalk between inputs: -50 dB min
- Repeat accuracy at 25°C: ±0.05%
- Operational error limit (full temperature range): ±0.5%
- Basic error limit (at 25°C): ±0.3%
- Series mode interference suppression: 70 dB min
- Common mode voltage: 10V max
- Common mode interference suppression: 90 dB min
- Diagnostic functions: Yes — supply voltage, wire-break (4-20mA), short-circuit, group error, overflow/underflow
- Diagnostic alarm: Yes
- Status LEDs: Green PWR LED, green channel status LED, green/red module DIAG LED
- Isolation between channels: No
- Isolation between channels and backplane bus: Yes
- Isolation between channels and electronics supply: Yes
- Permissible potential difference (between inputs): 10 Vpp
- Isolation test voltage: 707V DC (type test)
- Reparameterization in RUN (CiR): Yes
- Calibration in RUN: No
- Operating temperature: -30°C to 60°C (horizontal), -30°C to 50°C (vertical)
- Max installation altitude: 5,000 m (restrictions above 2,000 m)
- Dimensions (W x H x D): 15 x 73 x 58 mm
- Weight: 32 g approx.
Applications
The Siemens 6ES7134-6GB00-0BA1 SIMATIC ET 200SP Analog Electronics Module is commonly used in:
- Precise current-loop measurement (0-20mA, ±20mA, 4-20mA)
- Process automation using 2-wire or 4-wire transmitters
- Applications requiring configuration changes without stopping the process
- Systems needing wire-break and short-circuit diagnostics
- Space-constrained panels needing compact analog input channels
- Machine and process monitoring in ET 200SP distributed I/O stations
Why Choose QTech Safety?
At QTech Safety, we’re more than just a safety supplier we’re your trusted partner in workplace protection and compliance.
Here’s why companies across UK and Ireland (EU) choose us for safety products and training:
- Comprehensive Range of Safety Equipment:
From gas detection and PPE to industrial safety tools, we offer one of the widest selections of trusted brands all at competitive Irish market prices. - Test & Measurement Instruments You Can Trust:
We supply a wide range of test and measurement instruments from the most leading and trusted brands, including industrial sensors, multimeters, oscilloscopes, accelerometers, proximity sensors, and other advanced measurement tools to support accurate diagnostics, condition monitoring, calibration, and maintenance applications. - Expert Health & Safety Training:
We provide professional health and safety training programmes designed to help your workforce stay compliant and confident on the job. - Fast, Reliable Delivery Worldwide:
Whether you’re in Texas United States or Perth Western Australia, our fast delivery service ensures you get your safety equipment quickly and efficiently. - Trusted by European Businesses:
We’re proud to support industries across Europe (UK) with certified safety solutions, expert advice, and responsive customer service.
We Ship Worldwide
At QTech Safety, we supply industrial sensors and instrumentation across Ireland, offering fast and reliable worldwide delivery. Through strong global logistics partnerships, we ensure efficient shipping and professional support for customers in Europe, North America, and Australia.
🡆 Europe (United Kingdom, Ireland, Germany, France, Italy, Spain, and the rest of European Union)
🡆 Australia (Western Australia WA, Queensland QLD, and New South Wales NSW)
🡆 North America (United States, Canada, Mexico)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
