You are here:
Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP Analog HART Input Module
The Siemens 6ES7134-6TD00-0CA1 is a SIMATIC ET 200SP analog HART input module designed for precise acquisition of 4–20 mA signals from 2-wire HART transducers across 4 differential input channels. It is a compact, 15 mm-wide module designed for installation with BU type A0 or A1 base units and provides 16-bit resolution, channel-specific diagnostics, and HART communication support from Revision 5 through Revision 7. The module supports configuration in RUN and is an active PM300 product in the Siemens portfolio.
Looking for a Quote? Contact Us Now
Categories: PLC I/O Modules
Description
The Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP AI 4xI 2-wire HART High Feature analog input module provides 4 differential analog inputs for standard 4–20 mA current signals from 2-wire transmitters, with a maximum permissible input current of 50 mA and an input resistance of 280 Ω plus approximately 0.35 V diode forward voltage. Each channel uses an integrating Sigma-Delta measurement principle, supports up to 16-bit resolution including sign, parameterizable integration time, and selectable interference suppression at 10 Hz, 50 Hz, or 60 Hz. The module also supports configurable measured-value smoothing with four selectable levels.
The module provides HART communication from Rev. 5 to Rev. 7, supports up to four HART variables directly in the input address space, and provides Value Status through PROFINET IO. Its diagnostic functions include supply-voltage monitoring, channel-by-channel wire-break and short-circuit detection, group error, overflow/underflow monitoring, diagnostic alarms, and limit value alarms. Reparameterization is possible during RUN, while Siemens specifies that calibration in RUN is not supported.
QTech Safety is a leading supplier of Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP Analog HART Input Module in Ireland, offering competitive prices and fast worldwide shipping across United Kingdom (UK), Germany, France, Italy, Spain, United States USA, Canada, Mexico, and Western Australia (Perth). Buy Siemens PLC I/O Modules from one of Ireland’s most trusted industrial safety equipment suppliers.
Features of Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP Analog HART Input Module
- Compact 15 mm-wide analog HART input module for SIMATIC ET 200SP
- 4 differential analog input channels
- Designed for 2-wire 4–20 mA transmitters
- Supports HART communication Rev. 5 to Rev. 7
- 16-bit resolution including sign
- Up to four HART variables available directly in the input address space
- Value Status support through PROFINET IO
- Integrating Sigma-Delta measurement principle
- Parameterizable integration time on a channel-by-channel basis
- Selectable interference suppression at 10 / 50 / 60 Hz
- Four selectable smoothing levels: none, 4×, 8×, or 16×
- Channel-by-channel wire-break and short-circuit diagnostics
- Diagnostic and limit value alarms
- Reparameterization during RUN (CiR)
- Firmware update capability
- I&M0 to I&M3 identification data
- Green PWR, green channel-status, red channel-diagnostics, and green/red DIAG LEDs
Technical Specifications of Siemens 6ES7134-6TD00-0CA1
- Product type: AI 4xI 2-wire HART
- Firmware version: V1.0
- Firmware update: Yes
- HART support: Rev. 5 to Rev. 7
- Usable BaseUnits: BU type A0, A1
- Color code: CC03
- Engineering software: TIA Portal V13 SP1+, STEP 7 V5.5 SP4+, PCS 7 V8.1 SP1+
- PROFIBUS support: GSD Revision 5
- PROFINET support: GSDML V2.3
- I&M data: I&M0 to I&M3
- Reparameterization in RUN (CiR): Yes
- Supply voltage: 24 V DC
- Permissible supply voltage: 19.2 V to 28.8 V DC
- Reverse polarity protection: Yes
- Current consumption: 25 mA max., without sensor supply
- 24 V encoder supply: Yes
- Encoder supply short-circuit protection: Yes
- Number of analog inputs: 4 differential inputs
- Input type: Current measurement
- Current input range: 4–20 mA
- Maximum permissible input current: 50 mA
- Input resistance: 280 Ω + approx. 0.35 V diode forward voltage
- Connection type: 2-wire transducer
- Maximum shielded cable length: 800 m
- Measurement principle: Integrating Sigma-Delta
- Maximum resolution: 16 bit including sign
- Integration time: Parameterizable, channel by channel
- Interference suppression: 10 / 50 / 60 Hz
- Measured-value smoothing: None, 4×, 8×, or 16×
- Linearity error: ±0.01%
- Temperature error: ±0.005%/K
- Crosstalk between inputs: ≥60 dB
- Diagnostic function: Yes
- Wire-break detection: Yes, channel by channel
- Short-circuit detection: Yes, channel by channel
- Operating temperature: −30°C to 60°C horizontal; −30°C to 50°C vertical
- Dimensions (W × H × D): 15 × 73 × 58 mm
- Weight: Approx. 31 g
Applications
The Siemens 6ES7134-6TD00-0CA1 SIMATIC ET 200SP Analog HART Input Module is commonly used in:
- Process instrumentation using 4–20 mA 2-wire transmitters
- HART-enabled pressure, flow, level, and temperature transmitter integration
- Industrial process monitoring requiring simultaneous analog and HART data
- Applications requiring channel-specific wire-break and short-circuit diagnostics
- ET 200SP installations requiring HART communication and diagnostic capability
- Process automation systems where transmitter variables must be accessible through HART
- Systems requiring module reparameterization while the station remains in RUN
Why Choose QTech Safety?
At QTech Safety, we’re more than just a safety supplier we’re your trusted partner in workplace protection and compliance.
Here’s why companies across UK and Ireland (EU) choose us for safety products and training:
- Comprehensive Range of Safety Equipment:
From gas detection and PPE to industrial safety tools, we offer one of the widest selections of trusted brands all at competitive Irish market prices. - Test & Measurement Instruments You Can Trust:
We supply a wide range of test and measurement instruments from the most leading and trusted brands, including industrial sensors, multimeters, oscilloscopes, accelerometers, proximity sensors, and other advanced measurement tools to support accurate diagnostics, condition monitoring, calibration, and maintenance applications. - Expert Health & Safety Training:
We provide professional health and safety training programmes designed to help your workforce stay compliant and confident on the job. - Fast, Reliable Delivery Worldwide:
Whether you’re in Texas United States or Perth Western Australia, our fast delivery service ensures you get your safety equipment quickly and efficiently. - Trusted by European Businesses:
We’re proud to support industries across Europe (UK) with certified safety solutions, expert advice, and responsive customer service.
We Ship Worldwide
At QTech Safety, we supply industrial sensors and instrumentation across Ireland, offering fast and reliable worldwide delivery. Through strong global logistics partnerships, we ensure efficient shipping and professional support for customers in Europe, North America, and Australia.
🡆 Europe (United Kingdom, Ireland, Germany, France, Italy, Spain, and the rest of European Union)
🡆 Australia (Western Australia WA, Queensland QLD, and New South Wales NSW)
🡆 North America (United States, Canada, Mexico)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
