You are here:
Siemens 6ES7135-4FB01-0AB0 SIMATIC DP ET 200S Analog Electronic Module
The Siemens 6ES7135-4FB01-0AB0 is a SIMATIC DP ET 200S analog output electronics module with 2 voltage outputs for applications requiring ±10 V or 1–5 V analog signals. It is a compact 15 mm-wide module with 13-bit plus sign resolution for ±10 V and 12-bit resolution for 1–5 V, providing fast analog output generation with a maximum cycle time of 1.5 ms for all channels. The module supports short-circuit protection, configurable substitute values, and electrical isolation from the backplane bus and load voltage.
Looking for a Quote? Contact Us Now
Categories: PLC I/O Modules
Description
The Siemens 6ES7135-4FB01-0AB0 SIMATIC DP ET 200S 2AO U ST analog output module provides 2 voltage output channels with selectable output ranges of 1–5 V and −10 V to +10 V. For ±10 V operation, it provides 13-bit resolution plus sign, while the 1–5 V range provides 12-bit resolution. The outputs are short-circuit protected and support both two-wire and four-wire actuator connections for voltage output, with a minimum load impedance of 1 kΩ and a maximum capacitive load of 1 µF. The module has a maximum cycle time of 1.5 ms, with settling times of 0.1 ms for resistive, 0.5 ms for capacitive, and 0.5 ms for inductive loads.
The module supports output short-circuit diagnostics, group error diagnostics, and parameterizable substitute values, with the red SF LED indicating group faults. Output behavior when the CPU/master enters STOP can be configured for output current, de-energized output, substitute value, or retaining the last value. The two analog channels are not electrically isolated from one another, while the outputs are isolated from the backplane bus and 24 V load voltage.
QTech Safety is a leading supplier of Siemens 6ES7135-4FB01-0AB0 SIMATIC DP ET 200S Analog Electronic Module in Ireland, offering competitive prices and fast worldwide shipping across United Kingdom (UK), Germany, France, Italy, Spain, United States USA, Canada, Mexico, and Western Australia (Perth). Buy Siemens PLC I/O Modules from one of Ireland’s most trusted industrial safety equipment suppliers.
Features of Siemens 6ES7135-4FB01-0AB0 SIMATIC DP ET 200S Analog Electronic Module
- Compact 15 mm-wide ET 200S analog output module
- 2 analog voltage output channels
- Selectable 1–5 V or −10 V to +10 V output ranges
- 13-bit + sign resolution for ±10 V
- 12-bit resolution for 1–5 V
- Maximum 1.5 ms cycle time for all channels
- Short-circuit-protected voltage outputs
- Supports 2-wire and 4-wire actuator connections
- Minimum load impedance of 1 kΩ
- Maximum capacitive load of 1 µF
- Maximum shielded cable length of 200 m
- Configurable substitute values
- Short-circuit and group error diagnostics
- Red SF LED for group fault indication
- Electrical isolation from the backplane bus and load voltage
- Parameterizable behavior during CPU/master STOP
- Compatible with the SIMATIC ET 200S distributed I/O system
Technical Specifications of Siemens 6ES7135-4FB01-0AB0
- Product type: 2AO U ST
- Product family: SIMATIC DP ET 200S analog electronic modules
- Product lifecycle: Spare part / Product cancellation
- Supply voltage: 24 V DC from power module
- Reverse polarity protection: Yes
- Current consumption from load voltage L+: 130 mA max.
- Current consumption from backplane bus: 10 mA max.
- Power loss: 2 W max.
- Address space: 4 bytes
- Parameter length: 7 bytes
- Number of analog outputs: 2
- Output type: Voltage
- Output ranges: 1–5 V; −10 V to +10 V
- Voltage output short-circuit protection: Yes
- Short-circuit current: 25 mA max.
- Actuator connection, voltage output: 2-wire and 4-wire
- Line resistance compensation: Not available for 2-wire connection
- Minimum load impedance: 1 kΩ
- Maximum capacitive load: 1 µF
- Maximum external voltage at output toward MANA: 15 V continuous; 75 V for max. 1 s at a 1:20 duty ratio
- Maximum external current: 50 mA DC
- Maximum shielded cable length: 200 m
- Resolution: 14-bit maximum including overrange; 13-bit + sign for ±10 V; 12-bit for 1–5 V
- Cycle time for all channels: 1.5 ms max.
- Settling time, resistive load: 0.1 ms
- Settling time, capacitive load: 0.5 ms
- Settling time, inductive load: 0.5 ms
- Output ripple, 0–50 kHz: ±0.02%
- Linearity error: ±0.02%
- Temperature error: ±0.01%/K
- Repeat accuracy at 25°C: ±0.05%
- Operational error limit over full temperature range: ±0.4%
- Basic error limit at 25°C: ±0.2%
- Substitute values: Yes, 0 to 65535 within the rated range
- Diagnostic information readable: Yes
- Short-circuit diagnosis: Yes
- Group error diagnosis: Yes
- Diagnostic LED: Red SF LED
- Short-circuit diagnostic parameter: Disable / enable
- Group diagnostics parameter: Disable / enable
- Response to CPU/master STOP: Output current / de-energized / substitute value / keep last value
- Isolation between channels: No
- Isolation between channels and backplane bus: Yes
- Isolation between channels and load voltage L+: Yes
- Permissible potential difference between MANA and central grounding point: 75 V DC / 60 V AC
- Isolation test voltage: 500 V DC
- Isochronous mode: No
- Dimensions (W × H × D): 15 × 81 × 52 mm
- Weight: Approx. 40
Applications
The Siemens 6ES7135-4FB01-0AB0 SIMATIC DP ET 200S Analog Electronic Module is commonly used in:
- Analog voltage control of industrial actuators
- PLC-based control systems requiring 1–5 V or ±10 V signals
- Motor, valve, drive, and process-control applications using voltage-controlled devices
- ET 200S distributed I/O systems requiring fast analog output generation
- Applications requiring configurable substitute values during CPU/master STOP
- Industrial automation systems requiring short-circuit monitoring and electrical isolation
Why Choose QTech Safety?
At QTech Safety, we’re more than just a safety supplier we’re your trusted partner in workplace protection and compliance.
Here’s why companies across UK and Ireland (EU) choose us for safety products and training:
- Comprehensive Range of Safety Equipment:
From gas detection and PPE to industrial safety tools, we offer one of the widest selections of trusted brands all at competitive Irish market prices. - Test & Measurement Instruments You Can Trust:
We supply a wide range of test and measurement instruments from the most leading and trusted brands, including industrial sensors, multimeters, oscilloscopes, accelerometers, proximity sensors, and other advanced measurement tools to support accurate diagnostics, condition monitoring, calibration, and maintenance applications. - Expert Health & Safety Training:
We provide professional health and safety training programmes designed to help your workforce stay compliant and confident on the job. - Fast, Reliable Delivery Worldwide:
Whether you’re in Texas United States or Perth Western Australia, our fast delivery service ensures you get your safety equipment quickly and efficiently. - Trusted by European Businesses:
We’re proud to support industries across Europe (UK) with certified safety solutions, expert advice, and responsive customer service.
We Ship Worldwide
At QTech Safety, we supply industrial sensors and instrumentation across Ireland, offering fast and reliable worldwide delivery. Through strong global logistics partnerships, we ensure efficient shipping and professional support for customers in Europe, North America, and Australia.
🡆 Europe (United Kingdom, Ireland, Germany, France, Italy, Spain, and the rest of European Union)
🡆 Australia (Western Australia WA, Queensland QLD, and New South Wales NSW)
🡆 North America (United States, Canada, Mexico)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
